Classic AutoAir Perfect Fit-Elite Series Instruções de Operação descarregar pdf (Página 23)

Attach #8 refrigerant hose with service port end to the compressor using (1) #8 o-ring and a

few drops of mineral oil. Tighten securely.

ELECTRICAL WIRING

The wiring of our ELITE series has been simplified. We have taken several

steps to ensure easy connection of all actuators to state of the art ECU board

that will control all heat, A/C, defrost functions.

---First locate the (3) Wiring harnesses from the control sack kit each

harness is color coded(yellow, blue, orange)

---Locate the ECU on the evaporator unit (page4 fig.1 & 2)

---Locate the BLUE wiring harness and plug on end into the color

correct connection on the ECU, plug other end into correct color

coded actuator on evaporator

---Locate the YELLOW wiring harness and plug on end into the color

correct connection on the ECU, plug other end into correct color

coded actuator on evaporator

---Locate the ORANGE wiring harness and plug on end into the color

correct connection on the ECU, plug other end into correct color

coded actuator on the water valve(refer to page 10 for correct water

valve installation)

---Locate your control harness (GREEN) plug the connector to the

ECU in the correct color coded plug

----Locate the main power wiring harness (refer to wiring diagram for

specific details pg 10)

----Plug the RED connection into the RED coded plug on the ECU

CAUTION:

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 29 30 31

Sem comentários

Classic AutoAir Perfect Fit-Elite Series Instruções de Operação Página 23