Classic AutoAir Perfect Fit-Elite Series Instruções de Operação descarregar pdf (Página 13)

Locate on the last page of the instructions

a template. Cut out as shown.

Tape the template to the firewall as

shown in the picture.

Notch the corner of the heater opening,

and drill (2) 7/8” diametre holes.

Using a pair of pliers flatten the lip of the opening

under the 7/8” holes.

Locate in the hardwae sack kit (2) heater bulkheads.

Insert bulkheads from the inside of the car. Attach

with nuts, tighten nuts.

Locate the (2) 5/8” diameter heater hoses provided in kit.

Locate (2) worm gear clamps from the hardware sack kit.

The longest heater hose attaches to the fitting on right

using (1) of the worm gear supplied.

S-CLIPS

(

)

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 30 31

Sem comentários

Classic AutoAir Perfect Fit-Elite Series Instruções de Operação Página 13